Gill Metpak, Руководство пользователя

Страница: 86 / 103

Gill Instruments Ltd
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
MetPak/MetPak RG and MetPak Pro Base Stations
Page | 86 Issue 1
Doc. No. 1723-PS-0023 October 2018
7.1.5. MetView Console Display Options
MetView Console buttons can convert data from the Base Station unit to read different units or
scale settings. This does not alter the actual Base Station unit configuration.
Units shown in bold denote default settings
.
MetView scale and unit options
MetView averaging options
Max/min markers
MetView Screen Settings Options
Setting Function
Save Settings Will Save all the current MetView screen settings to
a file for later retrieval if required.
Load Settings Will load and update the MetView screen with a
previously saved setting.
Default Settings Will return all MetView screen settings to factory
default.
Gauge Function
Wind Direction Use buttons to choose from two display styles:
NSEW or Maritime
Wind Speed Markers Use buttons to add markers on the gauge for
Max/Min or Max Gust.
Wind Speed Use buttons to choose from five wind speed units:
m/s , kph, mph, kts, fpm
Pressure Use buttons to choose from pressure scales:
hPa , mbar, inHg, mmHg
Humidity Displays Max and Min values during current session in
%
Temperature & DewPoint Use buttons to choose from three temperature scales:
°C , °F, K
PRT Use buttons to choose from three temperature scales:
°C , °F, K
AN1 Buttons displayed will depend on Analogue input type
selected.
AN2 Buttons displayed will depend on Analogue input type
selected.
DIG1 Typically for Rain, reads total rainfall since connected,
buttons available for inches or millimetres and a reset
button.
Setting Function
Real Time Choose this button for no averaging
2 Min Select for 2 minute rolling average of all sensor
readings except DIG1
10Min Select for 10 minute rolling average of all sensor
readings except DIG1
Setting Function
Off Maximum and Minimum Markers on all gauges
turned off
On Maximum and Minimum Markers on all gauges
turned on
Reset Reset all Gauge Maximum/Minimum Markers and all
digital Maximum/Minimum reading at will