Gill Instruments Ltd
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
MetPak/MetPak RG and MetPak Pro Base Stations
Page | 52
Issue 1
Doc. No. 1723-PS-0023
October 2018
MetSet reading MetPak Pro Base Station Default Settings
Setting
Function
Comms Levels
RS232
Baud Rate
19200
Data Connection
Data Bits 8, Parity None, Stop Bits 1, Flow Control None.
Node ID
Q
Output rate
1Hz
Message Mode
Continuous
ASCII Set Up
Carriage return and line feed, Echo on
North Alignment
0
Sensor WindSpeed
On
Wind Speed Units
MS (Metres/Second)
Temperature Sensor
On
Temperature Units
C (Degrees Celsius)
Dewpoint Sensor
On
Dewpoint Units
C (Degrees Celsius)
Pressure Sensor
On
Pressure Units
Hecto Pascals
Humidity Sensor
On
Humidity Units
%
Report Format
Node, Polar (Wind Direction and Wind Speed),
W Axis
, Pressure,
Humidity, Temperature, Dewpoint, PRT, AN1, AN2, DIG1, Volts,
Status, Checksum.
Status Message Output
On
Report Message Output
On
Units Message Output
On
Inputs Message Output
On
PRT Sensor
On
PRT Units
C (Degrees Celsius)
AN1 Sensor Type
Not Configured
AN1 Units
#
AN1 Analogue Input Type
Not Configured
AN1 Substitute Name
-
AN2 Sensor Type
Not Configured
AN2 Units
#
AN2 Analogue Input Type
Not Configured
AN2 Substitute Name
-
DIG1 Sensor Type
Not Configured
DIG1 Units
#
DIG1 Digital Count
Not Configured
DIG1 Substitute Name
-
Output Sentence
Comma Separated Variable
