GILES GVH-C Скачать руководство пользователя страница 15

Страница: 15 / 68

Model: GVH-C & GVH-F

Installation

This section summarizes procedures necessary for proper equipment installation. To help avoid personal injury or

equipment damage, be sure to adhere to all of these recommended procedures.

Installation expense (materials & labor) is completely the Purchaser’s responsibility. Generally, it is advisable to

engage the services of a professional commercial kitchen equipment specialist, a licensed electrician, and/or a

qualified HVAC contractor to assist with the details of installation. Call

Giles Technical Suppor

t @ 800.554.4537, if

assistance is required.

The hood is factory assembled with piping, conduit, nozzles, detector link brackets, and exhaust fire damper. Upon

installation It must be connected to a,

customer provided,

fire suppression system specified by the UL listing, which

is the

Ansul® R-102 Wet Chemical system

The system. field installation/set-up, testing and final commissioning

shall be provided by the purchaser, and must be supplied by an authorized

Ansul Distributor/Dealer

1. No minimum clearance (0”) is required between the top of air diverter and ceiling, but it is adviseable to

provide some clearance (3 to 6”) to allow make moving the unit easier should the need arise. Area around the

diverter openings must not be obstructed.

2. The

GVH-C

hood is designed to sit on a counter-top space. Ensure that the intended site is structurally sound

and capable of supporting the hood’s weight plus that of appliances to be placed under it. See

Section 1.04.4,

Hood Weight

2.01

Location

IMPORTANT!!

Before installing the GILES Recirculating/Ventless Hood system ensure that, A). all necessary approvals from local

code authorities have been obtained, B). the appliances to be used with the hood are all within the hood’s listing

limitations, as outlined in

Section 2.04

, and C). the installation site complies with the specific requirements and

limitations outlined in the

GFSE Recirculating/Ventless Hood Approval Letter (HAL)

. The

HAL

is available for

review or download at www.gfse.com under the

SUPPORT

tab in

VENTLESS DOCUMENTS

To ensure satisfactory hood performance after installation, the intended site MUST comply with minimum

requirements for kitchen size (>600 sq ft), ceiling height, fresh outdoor air make-up, supplemental exhaust

ventilation, clearances, etc. as stipulated in Giles’ Hood Approval Letter.

•

MAXIMUM of 1 hood per 600 sq ft of commercial kitchen space.

•

Fresh outside air make-up must be equal to a MINIMUM of fifteen (15) complete room air exchanges per hour.

•

Giles makes no representations as to proper design or layout of an establishment in which the ventless hood

will be used. Further, Giles does not perform site inspections prior to installation of any of its units.

• When operating, the hood produces a sound level of approximately

65 dB

•

DO NOT ALTER, ADD ATTACHMENTS OR OTHERWISE MODIFY THIS EQUIPMENT.

•

Failure to comply with installation requirements as specified by the Giles Hood Approval Letter will void the

factory warranty.

Continued on Next Page

Содержание GVH-C





































































Результаты поиска

Содержание GVH-C

Отзывы:

Похожие инструкции для GVH-C

Бренды по названию

Популярные бренды

GILES GVH-C, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание GVH-C

Отзывы:

Похожие инструкции для GVH-C

Бренды по названию

Популярные бренды