Installation Checklists
Page 3-2 MDE-5369E FlexPay™ IV (with Omnia) Programming and Service Manual · April 2020
Ensure that you have identified all relevant network
parameters.
Backroom Router IP address (Default Gateway)
____________.____________.____________.____________
Primary DNS IP address
____________.____________.____________.____________
External IP addresses for the dispensers:
____________.____________.____________.____________
Subnet mask
____________.____________.____________.____________
Verify if the customer has a contract in place for Insite360
Encore Remote Management.
Follow registration steps in this manual. Use Google
Chrome™
when available during Omnia configuration process. Do not
use IE version 9 or earlier; it will cause problems during the
registration process.
Day of Installation Checklist
Follow standard safety procedures during installation activities.
Lockout/tagout dispenser before beginning the installation.
Review installation process using the block diagram.
Before working on the dispenser, ensure that the Applause Media System is running on all fueling positions.
Ensure that all dispensers are functioning properly before beginning the installation.
Post-installation Checklist
Verify that the date and time of dispenser and CRIND are
accurate.
If the registration process fails, call the Remote Management
Help Desk.
Refer to
.
For more information, refer to
.
For all dispensers, complete the Insite360 Cloud feature test,
if present.
Call the Remote Management Help Desk to perform feature
testing.
Verify the dispenser operation including Applause Media
System, if present.
Run a transaction and confirm that media is being displayed on
the CRIND.
Pre-Installation Checklist
