MDE-4699L Applause™ Media System Installation, Service, and Parts Manual · June 2017
Page 4-9
Configuring Applause Media System
Start-up
Notes: 1) To configure the router, refer to
“Appendix D - Broadband Router and Network
2) These settings may be different depending on Control Center connectivity
[Virtual Private Network (VPN)/WAN/LAN].
3) It is necessary for the technician to coordinate with the site’s IT personnel to set up
non-Gilbarco IP addresses.
4) Do not use hyphens when entering phone numbers.
6
Fill in the fields of the Network Settings screen using location-specific information.
Note: Either the Ethernet Settings or the Modem Settings section will be filled out, not both.
7
Click
Continue
. The Change Password screen appears.
Figure 4-9: Change Password Screen
8
Enter “admin” in the Current Password field. Enter a new unique password for the “gilbarco”
user in both the New Password and Re-enter New Password fields.
