Gigabyte GA-X79S-UP5 User's Скачать руководство пользователя

Страница: 53 / 112

- 53 -

BIOS Setup

SAS Controller (Intel C606 Chipset)

Enables or disables the integrated SAS controllers. (Default: Disabled)

Audio Device Control

Enables or disables the onboard audio function. (Default: Enabled)

If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to

Disabled

USB 2.0 Controller

Enables or disables the integrated USB 2.0/1.1 controller. (Default: Enabled)

Intel SATA Controller Mode (Intel C606 Chipset)

Enables or disables RAID for the SATA controllers integrated in the Intel C606 Chipset or configures the

SATA controllers to AHCI mode.

IDE Mode

Disables RAID for the SATA controllers and configures the SATA controllers to IDE

mode.

RAID Mode

Enables RAID for the SATA controllers.

AHCI Mode

Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface

(AHCI) is an interface specification that allows the storage driver to enable advanced

Serial ATA features such as Native Command Queuing and hot plug. (Default)

Disabled

Disables this function.

Port 0~5 Hot Plug

Enables or disables the hot plug function for the SATA3 0~1 and SATA2 2~5 connectors. (Default: Disabled)

Legacy USB Support

Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)

XHCI Hand-off

Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off

support. (Default: Enabled)

EHCI Hand-off

Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off

support. (Default: Disabled)

Port 60/64 Emulation

Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support

for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices.

(Default: Disabled)

USB Storage Devices

Displays a list of connected USB mass storage devices. This item appears only when a USB storage device

is installed.

Trusted Computing

TPM SUPPORT

Enables or disables Trusted Platform Module (TPM). Set this item to

Enable

when a TPM device is installed.

(Default: Disable)

Fresco USB3.0 Controller (Fresco FL1009 USB Controller, USB 3.0/2.0 ports)

Enables or disables the Fresco FL1009 USB 3.0/2.0 controller. (Default: Enabled)

Содержание GA-X79S-UP5 User's

















































































































Результаты поиска

Содержание GA-X79S-UP5 User's

Отзывы:

Похожие инструкции для GA-X79S-UP5 User's

Бренды по названию

Популярные бренды

Gigabyte GA-X79S-UP5 User's, Руководство пользователя

Результаты поиска

Содержание GA-X79S-UP5 User's

Отзывы:

Похожие инструкции для GA-X79S-UP5 User's

Бренды по названию

Популярные бренды