Gigabyte GA-X79S-UP5 User's Скачать руководство пользователя

Страница: 10 / 112

- 10 -

Hardware Installation

1-2 Product Specifications

CPU

Support for Intel

Core

™

i7 processors in the LGA2011 package

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset

Intel

C606 Express Chipset

Memory

8 x 1.5V DDR3 DIMM sockets supporting up to 64 GB of system memory

* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than the size of

the physical memory installed.

4 channel memory architecture

Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules

Support for ECC memory modules

Support for Extreme Memory Profile (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Audio

Realtek ALC898 codec

High Definition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN

1 x Intel GbE LAN chip (10/100/1000 Mbit) (LAN1)

1 x Realtek GbE LAN chip (10/100/1000 Mbit) (LAN2)

Expansion Slots

2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)

* For optimum performance, if only one PCI Express graphics card is to be installed, be

sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics

cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2

slots.

1 x PCI Express x16 slot, running at x8 (PCIEX8)

* The PCIEX8 slot shares bandwidth with the PCIEX16_2 slot. When the PCIEX8 slot

is populated, the PCIEX16_2 slot will operate at up to x8 mode.

1 x PCI Express x16 slot, running at x4 (PCIEX4)

(The PCIEX16, PCIEX8, and PCIEX4 slots conform to PCI Express 3.0 standard.)

1 x PCI Express x1 slot

(The PCIEX1 slot conforms to PCI Express 2.0 standard.)

1 x PCI slot

Multi-Graphics
Technology

Support for 3-Way/2-Way AMD CrossFireX

™

/NVIDIA SLI technology

Storage Interface

Chipset:

- 2 x SATA 6Gb/s connectors (SATA3 0~1) supporting up to 2 SATA 6Gb/s

devices

- 4 x SATA 3Gb/s connectors (SATA2 2~5) supporting up to 4 SATA 3Gb/s

devices

- Support for RAID 0, RAID 1, RAID 5, and RAID 10

* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the

system performance of the RAID set may vary depending on the devices being

connected.

- 8 x SAS 3Gb/s connectors (SAS2 0~7) supporting up to 8 SAS 3Gb/s devices

* The SAS connectors do not support optical drives.

- Support for RAID 0, RAID 1, and RAID 10

Содержание GA-X79S-UP5 User's

















































































































Результаты поиска

Содержание GA-X79S-UP5 User's

Отзывы:

Похожие инструкции для GA-X79S-UP5 User's

Бренды по названию

Популярные бренды

Gigabyte GA-X79S-UP5 User's, Руководство пользователя

Результаты поиска

Содержание GA-X79S-UP5 User's

Отзывы:

Похожие инструкции для GA-X79S-UP5 User's

Бренды по названию

Популярные бренды