GIGA-BYTE TECHNOLOGY GA-Z270X-UD5 Скачать руководство пользователя страница 89

Страница: 89 / 136

- 89 -

Unique Features

Step 2:
The screen will show that the BIOS file is being read from your USB flash drive. Please select

Fast

Intact

begin the BIOS update. The screen will then display the update process.

Step 3:
The system will restart after the update process is complete.

•

Do not turn off or restart the system when the system is reading/updating the BIOS.

•

Do not remove the USB flash drive or hard drive when the system is updating the BIOS.

Step 4:
During the POST, press <Delete> to enter BIOS Setup. Select

Load Optimized Defaults

on the

Save & Exit

screen and press <Enter> to load BIOS defaults. System will re-detect all peripheral devices after a BIOS update,
so we recommend that you reload BIOS defaults.

Step 5:
Select

Save & Exit Setup

and press <Enter>. And then select

Yes

to save settings to CMOS and exit BIOS

Setup. The procedure is complete after the system restarts.

Select

Yes

to load BIOS defaults

Содержание GA-Z270X-UD5









































































































































Результаты поиска

Содержание GA-Z270X-UD5

Отзывы:

GIGA-BYTE TECHNOLOGY GA-Z270X-UD5, Руководство пользователя, Страница: 89 / 136

Результаты поиска

Содержание GA-Z270X-UD5

Отзывы: