GIGA-BYTE TECHNOLOGY GA-Z270X-UD5 Скачать руководство пользователя страница 48

Страница: 48 / 136

BIOS Setup

- 48 -

C8 State Support

(Note 1)

Allows you to determine whether to let the CPU enter C8 mode in system halt state. When enabled, the CPU

core frequency and voltage will be reduced during system halt state to decrease power consumption. The

C8 state is a more enhanced power-saving state than C6/C7.

Auto

lets the BIOS automatically configure

this setting. (Default: Auto)

Package C State Limit

(Note 1)

Allows you to specify the C-state limit for the processor.

Auto

lets the BIOS automatically configure this

setting. (Default: Auto)

Package C State Limit

(Note 1)

Allows you to specify the C-state limit for the processor.

Auto

lets the BIOS automatically configure this

setting. (Default: Auto)

CPU Thermal Monitor

(Note 1)

Enables or disables Intel

Thermal Monitor function, a CPU overheating protection function. When enabled,

the CPU core frequency and voltage will be reduced when the CPU is overheated.

Auto

lets the BIOS

automatically configure this setting. (Default: Auto)

CPU EIST Function

(Note 1)

Enables or disables Enhanced Intel

Speed Step Technology (EIST). Depending on CPU loading, Intel

EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease

average power consumption and heat production.

Auto

lets the BIOS automatically configure this setting.

(Default: Auto)

Voltage Optimization

Allows you to determine whether to enable voltage optimization to reduce power consumption. (Default:

Disabled)

RSR

Allows you to determine whether to automatically lower the CPU turbo ratio if the CPU voltage/temperature

is too high. (Default: Enabled)

Hardware Prefetcher

Allows you to determine whether to enable hardware prefetcher to prefetch data and instructions from the

memory into the cache. (Default: Enabled)

Adjacent Cache Line Prefetch

Allows you to determine whether to enable the adjacent cache line prefetch mechanism that lets the

processor retrieve the requested cache line as well as the subsequent cache line. (Default: Enabled)

Extreme Memory Profile (X.M.P.)

(Note 2)

Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when

enabled.

Disabled

Disables this function. (Default)

Profile1

Uses Profile 1 settings.

Profile2

(Note 2)

Uses Profile 2 settings.

System Memory Multiplier

Allows you to set the system memory multiplier.

Auto

sets memory multiplier according to memory SPD

data. (Default: Auto)

(Note 1) This item is present only when you install a CPU that supports this feature. For more information about

Intel

CPUs' unique features, please visit Intel's website.

(Note 2) This item is present only when you install a CPU and a memory module that support this feature.

Содержание GA-Z270X-UD5









































































































































Результаты поиска

Содержание GA-Z270X-UD5

Отзывы:

GIGA-BYTE TECHNOLOGY GA-Z270X-UD5, Руководство пользователя, Страница: 48 / 136

Результаты поиска

Содержание GA-Z270X-UD5

Отзывы: