GIGA-BYTE TECHNOLOGY GA-Z270X-UD5 Скачать руководство пользователя страница 3

Страница: 3 / 136

Copyright

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specifications and features in this manual may be made by GIGABYTE

without prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in any

form or by any means without GIGABYTE's prior written permission.

Documentation Classifications

In order to assist in the use of this product, GIGABYTE provides the following types of

documentations:

For quick set-up of the product, read the Quick Installation Guide included with the product.

For detailed product information, carefully read the User's Manual.

For product-related information, check on our website at: http://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV:

1.0" means the revision of the motherboard is 1.0. Check your motherboard revision before

updating motherboard BIOS, drivers, or when looking for technical information.

Example:

Содержание GA-Z270X-UD5









































































































































Результаты поиска

Содержание GA-Z270X-UD5

Отзывы:

GIGA-BYTE TECHNOLOGY GA-Z270X-UD5, Руководство пользователя, Страница: 3 / 136

Результаты поиска

Содержание GA-Z270X-UD5

Отзывы: