GIGA-BYTE TECHNOLOGY GA-Z270X-UD5 Скачать руководство пользователя страница 67

Страница: 67 / 136

- 67 -

Configuring a RAID Set

Chapter 3 Configuring a RAID Set

To create a RAID set, follow the steps below:

A. Install SATA hard drive(s) or SSDs in your computer.
B.

Configure SATA controller mode in BIOS Setup.

Configure a RAID array in RAID BIOS.

(Note 1)

Install the SATA RAID/AHCI driver and operating system.

Before you begin, please prepare the following items:

•

At least two SATA hard drives or SSDs

(Note 2)

(to ensure optimal performance, it is recommended that you

use two hard drives with identical model and capacity).

(Note 3)

•

A Windows setup disk.

•

Motherboard driver disk.

•

A USB thumb drive.

RAID Levels

3-1 Configuring SATA Controllers

A. Installing hard drives

Install the hard drives/SSDs in the Intel

Chipset controlled connectors on the motherboard. Then connect

the power connectors from your power supply to the hard drives.

RAID 0

RAID 1

RAID 5

RAID 10

Minimum

Number of Hard

Drives

≥2

≥3

Array Capacity Number of hard

drives * Size of the

smallest drive

Size of the smallest

drive

(Number of hard

drives -1) * Size of

the smallest drive

(Number of hard

drives/2) * Size of the

smallest drive

Fault Tolerance

Yes

(Note 1) Skip this step if you do not want to create RAID array on the SATA controller.
(Note 2) An M.2 PCIe SSD or an U.2 SSD cannot be used to set up a RAID set either with an M.2 SATA SSD

or a SATA hard drive.

(Note 3) Refer to "1-9 Internal Connectors," for the installation notices for the U.2, M.2, and SATA connectors.

Содержание GA-Z270X-UD5









































































































































Результаты поиска

Содержание GA-Z270X-UD5

Отзывы:

GIGA-BYTE TECHNOLOGY GA-Z270X-UD5, Руководство пользователя, Страница: 67 / 136

Результаты поиска

Содержание GA-Z270X-UD5

Отзывы: