GIGA-BYTE TECHNOLOGY GA-Z270X-UD5 Скачать руководство пользователя страница 59

Страница: 59 / 136

BIOS Setup

- 59 -

Initial Display Output

Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the

onboard graphics.

IGFX

Sets the onboard graphics as the first display.

PCIe 1 Slot

Sets the graphics card on the PCIEX16 slot as the first display. (Default)

PCIe 2 Slot

Sets the graphics card on the PCIEX8 slot as the first display.

PCIe 3 Slot

Sets the graphics card on the PCIEX4 slot as the first display.

OnBoard LAN Controller (LAN2)

Enables or disables the onboard LAN function. (Default: Enabled)

If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to

Disabled

EZ RAID

Allows you to quickly set up a RAID array. Refer to Chapter 3, "Configuring a RAID Set," for instructions

on configuring a RAID array.

Ambient LED

Enables or disables the onboard audio LED function. (Default: On)

Intel Platform Trust Technology (PTT)

Enables or disables Intel

PTT Technology. (Default: Disabled)

Thunderbolt(TM) Configuration

This sub-menu provides Intel

Thunderbolt

™

related information and configuration options.

OffBoard SATA Controller Configuration

Displays information on your M.2 PCIe SSD if installed.

Trusted Computing

Enables or disables Trusted Platform Module (TPM).

2-6 Peripherals

Содержание GA-Z270X-UD5









































































































































Результаты поиска

Содержание GA-Z270X-UD5

Отзывы:

GIGA-BYTE TECHNOLOGY GA-Z270X-UD5, Руководство пользователя, Страница: 59 / 136

Результаты поиска

Содержание GA-Z270X-UD5

Отзывы: