GIGA-BYTE TECHNOLOGY GA-Z270X-UD5 Скачать руководство пользователя страница 54

Страница: 54 / 136

BIOS Setup

- 54 -

Smart Fan 5 Settings

Monitor

Allows you to select a target to monitor and to make further adjustment. (Default: CPU FAN)

Fan Speed Control

Allows you to determine whether to enable the fan speed control function and adjust the fan speed.

Normal

Allows the fan to run at different speeds according to the temperature. You can adjust

the fan speed with System Information Viewer based on your system requirements.

(Default)

Silent

Allows the fan to run at slow speeds.

Manual

Allows you to control the fan speed in the curve graph.

Full Speed

Allows the fan to run at full speeds.

Fan Control Use Temperature Input

Allows you to select the reference temperature for fan speed control.

Temperature Interval

Allows you to select the temperature interval for fan speed change.

Fan/Pump Control Mode

Auto

Lets the BIOS automatically detect the type of fan/pump installed and sets the optimal

control mode. (Default)

Voltage

Voltage mode is recommended for a 3-pin fan/pump.

PWM

PWM mode is recommended for a 4-pin fan/pump.

Temperature

Displays the current temperature of the selected target area.

Fan Speed

Displays current fan/pump speeds.

Temperature Warning Control

Sets the warning threshold for temperature. When temperature exceeds the threshold, BIOS will emit

warning sound. Options are: Disabled (default), 60

C/140

F, 70

C/158

F, 80

C/176

F, 90

C/194

Fan/Pump Fail Warning

Allows the system to emit warning sound if the fan/pump is not connected or fails. Check the fan/pump

condition or fan/pump connection when this occurs. (Default: Disabled)

Содержание GA-Z270X-UD5









































































































































Результаты поиска

Содержание GA-Z270X-UD5

Отзывы:

GIGA-BYTE TECHNOLOGY GA-Z270X-UD5, Руководство пользователя, Страница: 54 / 136

Результаты поиска

Содержание GA-Z270X-UD5

Отзывы: