GIGA-BYTE TECHNOLOGY GA-Z270X-UD5 Скачать руководство пользователя страница 10

Страница: 10 / 136

- 10 -

Hardware Installation

1-2 Product Specifications

CPU

Support for 7th and 6th generation Intel

Core

™

i7 processors/

Intel

Core

™

i5 processors/Intel

Core

™

i3 processors/

Intel

Pentium

processors/Intel

Celeron

processors in the LGA1151 package

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset

Intel

Z270 Express Chipset

Memory

4 x DDR4 DIMM sockets supporting up to 64 GB of system memory

* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than the size of

the physical memory installed.

Dual channel memory architecture

Support for DDR4 2400/2133 MHz memory modules

Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in

non-ECC mode)

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

Support for Extreme Memory Pro

ﬁ

le (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard
Graphics

Integrated Graphics PrIntel

Thunderbolt

™

3 Controller:

1 x Intel

Thunderbolt

™

3 connector, supporting DisplayPort and Thunderbolt

™

video outputs and a maximum resolution of 4096x2304@60 Hz

* Because of the limited I/O resources of the PC architecture, the number of

Thunderbolt

™

devices that can be used is dependent on the number of the PCI

Express devices being installed. (Refer to Chapter 1-7, "Back Panel Connectors,"

for more information.)

Integrated Graphics Processor-Intel

HD Graphics support:

1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz

* Support for DisplayPort 1.2 version.

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@24 Hz

* Support for HDMI 1.4 version.

Maximum shared memory of 1 GB

Audio

Realtek

ALC1220 codec

High De

ﬁ

nition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN

2 x Intel

GbE LAN chips (10/100/1000 Mbit)

Expansion Slots

1 x PCI Express x16 slot, running at x16 (PCIEX16)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

1 x PCI Express x16 slot, running at x8 (PCIEX8)

* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot

is populated, the PCIEX16 slot operates at up to x8 mode.

1 x PCI Express x16 slot, running at x4 (PCIEX4)

* The PCIEX4 slot shares bandwidth with the PCIEX1_2 and PCIEX1_3 slots. When the

PCIEX1_2 or PCIEX1_3 slot is populated, the PCIEX4 slot operates at up to x1 mode.

3 x PCI Express x1 slots

(All of the PCI Express slots conform to PCI Express 3.0 standard.)

Содержание GA-Z270X-UD5









































































































































Результаты поиска

Содержание GA-Z270X-UD5

Отзывы:

GIGA-BYTE TECHNOLOGY GA-Z270X-UD5, Руководство пользователя, Страница: 10 / 136

Результаты поиска

Содержание GA-Z270X-UD5

Отзывы: