www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
ENGLISH
- 3
TYPE OF USE
These devices were designed to vacuum liq-
uids or solids or both, according to the tech-
nical data table from the introduction to this
manual.
Uses different from those listed above are
not allowed.
Any use different from the one for which the
vacuum has been built represents an anom-
alous condition which could harm the appli-
ance and constitute a serious hazard for the
user.
DANGER:
The manufacturer can not be held
responsible for any damage due
to improper or incorrect use.
Any other use releases the manu-
facturer from liability for harm to
persons and/or property and in
-
validates any warranty condition.
WARNING:
Always use dedicated filters depending
on the type of dusts or debris to be vac-
uumed.
WARNING:
Do not use the unit for:
- Vacuum hot substances.
- Don’t pick up flammable, incandes-
cent, explosive or toxic dust/blends.
- This machine is not suitable for pick-
ing up dangerous dust (unless oth-
erwise indicated).
- Do not use the equipment in hazard-
ous environments.
- Do not use the appliance in liquid
suction mode to suction powder and
vice versa.
WARNING:
Do not use outdoors.
This appliance must be stored, taking
its weight into consideration, on a solid,
steady, safe and not sloping plane, in-
door and in a dry area.
PREPARING
THE APPLIANCE
Vacuum cleaner
DANGER:
For Class M vacuum cleaners, use
only hoses with a diameter indi-
cated in the table “Technical Data
/ Class M suction hose diameter”.
For appliances equipped with suitable acces-
sories.
- Release the levers (1 Fig. 1) and remove
the cover (2 Fig. 2) complete with the mo-
tor unit and floater-holder (3 Fig. 2).
- Remove the polyester filter (4 Fig. 3).
- Check, if present, that the fleece bag (5
Fig. 3) is mounted inside the appliance.
- If the fleece bag (5 Fig. 3) is not present,
mount it, if required, as follows:
Slip on the fleece filter bag (5 Fig. 4) into
the intake (6 Fig. 4) past the collar (7 Fig.
4).
- Reassemble the polyester filter (4 Fig. 3).
Manuale POWER TOOL M_8050855_2ed_11-2020.indd 3
Manuale POWER TOOL M_8050855_2ed_11-2020.indd 3
04/11/2020 15:24:06
04/11/2020 15:24:06
