www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
ENGLISH
- 2
INTRODUCTION
DANGER:
Before using the machine, care
-
fully read the “SAFETY RECOM-
MENDATIONS FOR VACUUM
CLEANERS” booklet attached to
this document and the additions
below.
WARNING:
- The employer must inform, educate
and train the user following what is
prescribed by the current laws.
- Before working with this machine,
prepare and train by carefully read-
ing this manual. Not authorized and
not trained people cannot use this
machine.
- It is forbidden to aspirate toxic sub-
stances, unless the machine is
equipped with the special filters nec-
essary for the specific type of dust
which must be expressly requested
by you scrupulously observing the
current national standards.
- Before using the appliance, the op-
erator must be informed and trained
to use the machine and about the
substances for which the appliance
will be used, including the removal
and disposal of aspirated material.
- For maintenance, the machine must
be disassembled, cleaned and re-
paired, as far as possible, without
causing risks for the maintenance
personnel and for others.
The precautions include decontam-
ination before dismantling, the cor-
rect ventilation in the rooms in case
of the machine disassembling, the
maintenance zone cleaning and an
appropriate protection of the per-
sonnel.
- The manufacturer, or an educated
person, should inspect the appli-
ance at least once a year checking
if, for example, the filtering system
is intact, if the air flux is correct and
if the machine control system works
correctly.
- When performing maintenance or
repairs, all contaminated parts that
cannot be adequately cleaned must
be eliminated; these parts must be
placed in impermeable bags ac-
cording to current regulations on
that type of waste
- For the M Class, the machine out-
side will have to be decontaminat-
ed using an aspirator, a cloth or be
treated with a sealant before taking
the machine outside the danger
area. All the machines will be con-
sidered decontaminated once they
have exited from the danger zones
and once every action necessary to
avoid that the dust is dispersed has
been performed.
- For class M, the machine must be
thoroughly cleaned before leaving
the contaminated zone and trans-
ported.
- It is necessary to guarantee an ap-
propriate exchange of air in the room
where the machine is used. Please
refer to the national standards.
Manuale POWER TOOL M_8050855_2ed_11-2020.indd 2
Manuale POWER TOOL M_8050855_2ed_11-2020.indd 2
04/11/2020 15:24:06
04/11/2020 15:24:06