Ghibli & Wirbel 14631710001, Использование и обслуживание

Страница: 22 / 100

www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
ENGLISH - 6
In any case, always refer to the
current national standards and
laws.
Removing and replacing the fleece
dust bag (if present)
- Release the levers (1 Fig. 1) and remove
the cover (2 Fig. 2) complete with motor
unit and floater-holder (3 Fig. 2).
- Remove the polyester filter (4 Fig. 3).
- Remove the fleece dust bag (5 Fig. 3),
and replace it as indicated above.
- Reassemble all parts in reverse order of
disassembly.
Emptying the recovery tank
- Release the levers (1 Fig. 1) and remove
the cover (2 Fig. 2) complete with motor
unit and floater-holder (3 Fig. 2).
- Place it on the top of a drain and emp-
ty the liquid in the recovery tank (30 Fig.
16).
- Clean the inside of the tank with running
water and then reassemble in reverse or-
der of disassembly.
Daily cleaning
Checking and cleaning the polyester
filter (if present)
- Release the levers (1 Fig. 1) and remove
the cover (2 Fig. 2) complete with motor
unit and floater-holder (3 Fig. 2).
- Remove the polyester (4 Fig. 3) filter.
- Clean the filter (Fig. 17) from the inside
out with a blast of air.
- Reassemble everything in reverse order
of disassembly.
Cleaning the appliance
- Clean the unit body with a cloth damp-
ened with water or a mild detergent.
- Remove the top, as described above and
clean the inside with running water and
then empty it, as indicated above.
- Reassemble everything in reverse order
of disassembly.
DANGER:
Do not wash the appliance using
jets of water.
Periodic checks
Replacing the class M cartridge filter
- Release the levers (1 Fig. 1) and remove
the cover (2 Fig. 2) complete with motor
unit.
- Loosen the knob (31 Fig. 18) and remove
the filter (32 Fig. 18).
- Replace the filter (32 Fig. 19), remounting
it correctly in position.
- Reassemble everything in reverse order
of disassembly.
WARNING:
The debris on the filter and the filter
itself must be disposed following the
standards of the country where the vac-
uum is being used.
Checking the air outlet filter
- Loosen the screws (33 Fig. 20) and re-
move the cover (34 Fig. 20).
- Remove the foam tank (35 Fig. 21) and
the texture sponges (36 Fig. 22) if any.
- Clean the sponges with a blast of air (Fig.
23).
Manuale POWER TOOL M_8050855_2ed_11-2020.indd 6 Manuale POWER TOOL M_8050855_2ed_11-2020.indd 6 04/11/2020 15:24:06 04/11/2020 15:24:06