GGP ITALY SPA MJ 66, Руководство оператора

Страница: 70 / 116

EN - 14
and damage its edge as well as the cutting
means.
6. MAINTENANCE
6.1 SAFETY RECOMMENDATIONS
WARNING! You must go to a special-
ized Service Centre or contact your Dealer if
the following are malfunctioning:
– the brake;
– the cutting means engage and disengage
functions,
– switching the drive to forward or reverse
gears.
6.2 ROUTINE MAINTENANCE
The table will help you maintain your machine’s
safety and performance. It summarises the main
interventions to be made and the frequency ap -
plicable to each of them.
The boxes at the side are for you to mark the
date or number of working hours at which the
intervention was made.
Operation Hours Completed (Date or Hours)
1. MACHINE
1.1
Cutting means positioning and sharpening
check 3)
25
1.2
Replacing cutting means
3)
100
1.3
Transmission belt check
3)
25
1.4
Transmission belt replacement 2) 3) –
1.5
Cutting means control belt check 3) 25
1.6
Replacing the cutting means control belt
check 2) 3)
–
1.7
Brake regulation and check
3)
25
1.8
Drive regulation and check
3)
25
1.9
Cutting means engage and brake check
3)
25
1.10
Complete bolt and screw check 25
1.11
General lubrication 4) 25
2. ENGINE 1)
2.1
Replacement of the engine oil …
2.2
Air filter cleaning and check …
2.3
Air filter replacement …
2.4
Fuel filter check …
2.5
Fuel filter replacement …
2.6
Spark plug points cleaning and check …
2.7
Replace spark plug …
1) See the engine manual for the full list and frequency.
2) At the first signs of any malfunction, contact your Dealer immediately.
3) The operation must be carried out by your Dealer or a specialized Service Centre.
4) General lubrication of all joints should also be carried out whenever the machine is to be left un -
used for a long period.