GF Signet 8150, Руководство по эксплуатации

Страница: 2 / 20

2
Signet 8150 Flow Totalizer
Caution / Warning / Danger
Indicates a potential hazard. Failure to follow all warnings
may lead to equipment damage, injury, or death
Electrostatic Discharge (ESD) / Electrocution Danger
Alerts user to risk of potential damage to product by ESD,
and/or risk of potential of injury or death via electrocution.
Hand tighten only!
Hand Tighten Only
Overtightening may permanently damage product threads
and lead to failure of the retaining nut.
Do Not Use Tools
Use of tool(s) may damage product beyond repair and
potentially void product warranty.
Dimensions
Refer to your local Georg Fischer Sales office for the most
current warranty statement.
All warranty and non-warranty repairs being returned must
include a fully completed Service Form and goods must be
returned to your local GF Sales office or distributor.
Product returned without a Service Form may not be
warranty replaced or repaired.
Signet products with limited shelf-life (e.g. pH, ORP, chlorine
electrodes, calibration solutions; e.g. pH buffers, turbidity
standards or other solutions) are warranted out of box but not
warranted against any damage, due to process or application
failures (e.g. high temperature, chemical poisoning, dry-out) or
mishandling (e.g. broken glass, damaged membrane, freezing
and/or extreme temperatures).
Thank you for purchasing the Signet line of Georg Fischer
measurement products.
If you would like to register your product(s), you can now
register online in one of the following ways:
• Visit our website
www.gfsignet.com.
Under Service and Support click on
Product Registration Form
• If this is a pdf manual (digital copy), click here
Chemical Compatibility
Warranty Information
Product Registration
Safety Information
Integral Mount
96 mm
(3.8 in.)
96 mm
(3.8 in.)
FRONT VIEW
106 mm
(4.2 in.)
82 mm
(3.2 in.)
Universal Mount
92 mm
(3.6 in.)
97 mm
(3.8 in.)
56 mm
(2.2 in.)
41 mm
(1.6 in.)
Optional
Rear
Cover
Panel Mount
SIDE VIEW
102 mm
(4.0 in.)
42 mm
(1.7 in.) 60 mm
(2.3 in.)
96 mm
(3.8 in.)
The retaining nuts of paddlewheel sensors are not designed
for prolonged contact with aggressive substances. Strong
acids, caustic substances and solvents or their vapor may
lead to failure of the retaining nut, ejection of the sensor and
loss of the process fluid with possibly serious consequences,
such as damage to equipment and serious personal injury.
Retaining nuts that may have been in contact with such
substances, e.g., due to leakage or spilling, must be replaced.
Integral Mount
96 mm
(3.8 in.)
96 mm
(3.8 in.)
FRONT VIEW
106 mm
(4.2 in.)
82 mm
(3.2 in.)
Universal Mount
92 mm
(3.6 in.)
97 mm
(3.8 in.)
56 mm
(2.2 in.)
41 mm
(1.6 in.)
Optional
Rear
Cover
Panel Mount
SIDE VIEW
102 mm
(4.0 in.)
42 mm
(1.7 in.) 60 mm
(2.3 in.)
96 mm
(3.8 in.)