GF Signet 8150, Руководство по эксплуатации

Страница: 7 / 20

7
Signet 8150 Flow Totalizer
Totalizers are shipped from the factory with these standard
settings:
No Flow and ELAPSED TIME Display
If the flow stops, the Flow Rate displays the number of hours
since flow was last detected. This display will alternate with
the normal Totalized Value and standard "no FLo" display
every five seconds.
Any movement of the rotor in the pipe will reset the ELAPSED
TIME display.
The 8150-1 display shows the flow rate in large numerals and
a totalizer value in smaller numerals. Any one of three different
totalizers can be selected as the standard display
(See page 9 for detailed information on the totalizers).
Press the ▲ or ▼ keys to scroll through all three totalizer
values during normal operation.
Illustrated: No flow for 3 hours
Operation Standard Menu Settings
ENTER
5 sec.
Function
Factory
set
Description
AUTO
CALIBRATION
No setting
See page 11 for detailed
information.
FLOW
K-FACTOR
60
Number of sensor
pulses per volumetric
unit; Refer to sensor
manual.
TOTAL
K-FACTOR
1
Set the number of
volumetric units per
totalizer count;
see page 12.
TIMEBASE Minutes
Select flow rate in
seconds, minutes,
hours or days.
Page 13.
DECIMAL
XXX.X
Set the maximum
decimal resolution.
Page 13.
SPEED 30 s
Zero to 120 seconds
averaging stabilizes
readings in erratic flow
conditions.
Page 15.
SENSITIVITY 6
Momentarily overrides
SPEED when flow rate
changes significantly.
Page 14.
SECURITY
CODE
0-0-0-0
Set a private code to
prevent tampering.
Page 8.
DEFAULT
TOTALIZER
Permanent
Select from three
totalizer options. Page
9.
TOTALIZER #2
RESET
Reset Totalizer #2 after
entering the security
code. Page 9.