Gerber SOLARA UV2, Руководство пользователя

Страница: 51 / 163

CHAPTER 4 51
Loading Inks and Materials
Metal rings
7
Insert the left (adjustable core flange) end of the roller into the left receiver.
Dancer Bar
Torque Bar (Do not wrap
material around this bar;
it is not part of the
material path.)
8
Wrap the material under the dancer bar and into the printer with the printable surface
facing up as shown in the illustration. Do not wrap the material around the lower
torque bar; it is not part of the material path. Continue with the procedure “Loading
roll material into the printer.”
Dancer Bar
Note: The material on the supply roll must not be slack to insure proper media feed. Re-roll
around the supply roll if necessary. Also check the tension on the feed roll brake.