Gerber SOLARA UV2, Руководство пользователя

Страница: 36 / 163

CHAPTER 3 36
Setting up the GERBER SOLARA UV2
Unlimited activation
For most GERBER SOLARA UV2 owners the activation settings will be set to “unlimited” hours
of operation and it is not necessary to access the activation page again. If your activation
settings are already set to unlimited, you do not need to activate the GERBER SOLARA UV2
and can begin printing without limitations.
Print-hour activation
Print-hour activation means that the GERBER SOLARA UV2 is setup for only a set amount of
print time. This only refers to hours of print time, not hours of operation. All functions and
features of the GERBER SOLARA UV2 are still available, however the machine will not allow
the start of another job after the activations hours have expired.
To add hours of operation to your GERBER SOLARA UV2, enter the appropriate activation
code in the space provided in the Activation web page. Activation codes are available from
Gerber and licensed Gerber Distributors.
Entering activation codes
Activation codes can add hours to the remaining print-hours you have on your machine or set
the allotted hours to a specific value. Each activation code is specific to your individual printer
and the same code cannot be used more than once. Activation codes are available from Gerber
and licensed Gerber Distributors.
When requesting an activation code you will need to provide the following information which
can be found on the GERBER SOLARA UV2 Activation web page:
MAC address
Printer
network name
Printer
Serial number
Sequence code
Note: The printer name, serial number and other information vary with each individual
machine. Your activation page may look slightly different from the example shown above.