Gerber HS750 Plus, Руководство пользователя

Страница: 58 / 94

52 HS750
plus
DETERMINING ERROR NUMBERS
The number of beeps and blinking lights signify the type of error
that has occurred. Error conditions are assigned a 2-digit number.
The number is displayed by flashing lights and beeping, one digit
at a time. The
RUN CONT
key displays the first (tens) digit; the
RUN
SINGLE
key displays the second (ones) digit. For example, an error
number of 25 is displayed by pressing
RUN CONT,
which flashes
lights 2 times, and pressing
RUN SINGLE ,
which flashes 5 times.
Follow the procedure below to find the number of the error.
1. Press the
RESET
key to clear the error signal (continuous
beeping).
2. Press the
RUN CONT
key to hear the number of beeps which
represent the “tens” error code number. (No beeps means that
the error message number falls between one and nine). The
Run lights flash the same number of times as the “tens” error
number. Press the
RUN CONT
key again to repeat the
message, if needed.
3. Press the
RUN SINGLE
key to hear the number of beeps which
represent the “ones” error code number. No beeps means that
there is no “ones” error number (a zero). The Run lights flash
the same number of times as the “ones” error number. Press
the
RUN SINGLE
key again to repeat the message, if needed.
4. Press the
RESET
key to clear the error display mode and return
to the initial off-line status.
The following examples may help you to understand how to
determine your error number:
!
If the
RUN CONT
key beeps twice and the
RUN SINGLE
key
beeps once, the error message code is 21.
!
If the
RUN CONT
key beeps once and the
RUN SINGLE
key
beeps twice, the error message code is 12.
!
If the
RUN CONT
key beeps once and the
RUN SINGLE
key
does not beep, the error message code is 10.
!
If the
RUN CONT
key does not beep and the
RUN SINGLE
key beeps eight times, the error message code is 8.