Gerber HS750 Plus, Руководство пользователя

Страница: 49 / 94

Operation 43
Single Plot Exercise
1. Turn on the HS750
plus
. Load plotting paper, install the pen and
pen holder, and set the tool force to .5.
2. Using the slew keys, position the carriage spindle
approximately 1" from the front edge of the plotting paper.
Also, be sure that there are several inches of paper extending
past the carriage spindle and to the left of the plotter.
3. Send a plot file to the HS750
plus
plotter.
4. Press the
RUN SINGLE
key to plot the test exercise.
RUN CONT
Use
RUN CONT
to access the continuous plotting mode and
maximize the plotter's productivity.
To plot in continuous mode
1. Select either swivel or tangential knife mode by pressing the
SWIVEL KNIFE
key. When swivel knife mode is selected, the
light above the
SWIVEL KNIFE
key is on.
2. Press
RUN CONT
. The light over the
RUN CONT
key comes on
and the HS750
plus
plots one job after the other without waiting
for user prompting between the jobs.
The HS750
plus
creates a queue of jobs to be plotted. When
one job finishes plotting, the next job in the queue begins
immediately. When all jobs in the queue are plotted, the
HS750
plus
remains on-line until the operator presses either
Run key or the
RESET
key to return to off-line status.
RUN
CONT