Gerber HS750 Plus, Руководство пользователя

Страница: 45 / 94

Operation 39
Slew Keys
Slew keys are the four keys surrounding the
SLOW
key.
Press the left and right slew keys to unroll material before plotting,
to position the tool for plotting, to position the carriage and
material between jobs, and to rotate the drum and feed material
through the plotter or back toward the roll holder.
Press the up or down slew keys to move the carriage between the
rear and the front of the plotter.
The slew and
SLOW
keys do not function during the following:
!
while a job is plotting
!
during an error condition
!
if a Run light is on, even if the plotter is idle.
SLOW
Use the
SLOW
key to access slow slew mode. Slow slew mode
permits you to move the drum or carriage one step at a time or
continuously at a very slow speed.
SLOW
SLOW