Gerber GSx Plus, Руководство пользователя, Страница: 35 / 60

34
Chapter 8:
Error Conditions
The GSx
plus
is programmed to detect several mechanical/electrical error
conditions at power-up or during operation. When an error condition occurs, the
plotter will turn off power to the stepper motors, flash the RUN lights, and
sound a steady tone.
To determine the error condition that stopped plotter operation
1
Press the RESET key to clear the error signal (flashing lights and steady
tone).
2
Press the RUN SINGLE key to display the error code number. The
RUN lights flash the same number of times as the error number
(
once
for Error 1, twice for Error 2, etc.). A short beep indicates the end of the
error message. Press the RUN SINGLE key again to repeat the
message, if desired.
3
Press the RESET key to clear the error display mode and return to the
initial off-line status.