Gerber GSx Plus, Руководство пользователя, Страница: 23 / 60

22
Pen Replacement
Spare pens in blue and red are included in the tool kit. Additional pens are
available through a Gerber distributor.
To replace a pen
1
Insert a flat-tip screwdriver into the notch at the base of the cone-
shaped cap (see below). Pry out the cap.
2
Use the Allen wrench supplied with the tool kit to loosen the hex screw
located near the tip of the pen. Remove the pen through the top of the
holder.
3
Insert a new pen, tip first, into the top of the holder.
4
The pen height gage included with the tool kit is a washer 1/8" thick.
Place the pen height gage on a smooth, hard surface like a table top.
Position the lower end of the pen holder on the gage.
5
Push down on the upper end of the pen until the point just touches the
table surface.