Gerber GSx Plus, Руководство пользователя, Страница: 17 / 60

16
2
Center the carriage spindle preferably by using the slew keys (see
"Front Panel" section) or manually, with certain precautions as outlined
here. Be sure that the carriage spindle is not located at either extreme
end of its travel and that both ends of the rubber drum can be reached
easily.
3
Open the bail arms at either end of the drum by pulling them up and
away from the drum.
4
Using the slew (arrow) keys, rotate the drum until three closely spaced
pins are visible. These three sprocket pins are used to align the material.
To feed and align material
1
Feed material under the black cam shaft and over the rubber drum. See
the illustration below.
2
Place the holes in the material over the sliding sprocket pins first.
Match the three closely spaced sprocket pins and holes.