Georator T3UPS-33-700K Скачать руководство пользователя страница 74

Страница: 74 / 98

Abnormal

Description & Checkpoint

Solution

(10) The
inverter shuts
down during
operation,
while the
FAULT LED
lights and
buzzer beeps
continuously.

Bypass breaker has been closed (switched
on).

Open the bypass breaker.
The inverter will restore
running automatically.

The output is short-circuited, including
the load itself.

Clear the short circuit at the
output, then switch off the
inverter.

Secondly, switch on once
more to restart the inverter.

The output is overloaded. The LCD will

Decrease the load to under

display warning message ‘ XXX%

the UPS’s rated power. Then

OVERLOAD’ in the STATUS/WARN

the inverter will restore

menu (MAIN menu

→

SELECT menu

→

running automatically.

STATUS/WARN menu). XXX%
OVERLOAD LED on left side of the
front panel and OVERLOAD LED on
right side will also light.

Heat Sink is over temperature.

Decrease the load to under

WARNING LED of FUSE/TEMP still

the UPS’s rated power, then

illuminates.

switch off the inverter.
Secondly, switch on once
more to restart the inverter.

IBGT-protect fuse has blown in P&P

Take out the P&P module

module1 or IGBT damage.

and replace fuse or IGBT.

When in battery back-up mode, the

Within 30 minutes, the

inverter shuts down due to battery low

inverter will restore running

(lower than 295VDC).

automatically once the AC
main is back.

The Emergency Switch has been

Switch off the inverter first

triggered.

then on once more to restart
the inverter.

9-4

Содержание T3UPS-33-700K



































































































Результаты поиска

Содержание T3UPS-33-700K

Отзывы:

Похожие инструкции для T3UPS-33-700K

Бренды по названию

Популярные бренды

Georator T3UPS-33-700K, Инструкция по эксплуатации

Результаты поиска

Содержание T3UPS-33-700K

Отзывы:

Похожие инструкции для T3UPS-33-700K

Бренды по названию

Популярные бренды