Georator T3UPS-33-700K, Инструкция по эксплуатации

Страница: 60 / 98

This menu is displayed when the item < DATE/TIME > is selected from MENU 5,
the PARAMETER SETTING menu. The user can change the YEAR/MONTH/DAY/,
HOUR/MINUTE/DAY OF THE WEEK of the real time clock through this menu.
Once this menu is opened, the present value in the real time clock will be shown.
The cursor (
→
) can be moved upward by the UP(
↑
) key, and can be moved
downward by the DOWN(
↓
) key to the item the user wants to change. The
selection is confirmed by pressing the ENTER (
←┘
) key. See the figure above.
The values to be entered are numbers except the DAY OF THE WEEK (MON,
TUE… provided for user selection). The values that can be entered are restricted to
certain values according to which item is being set (the values are listed below).
- YEAR : 1998 – 2097
- MONTH : 01-12
- DAY : 01 – 31 (internal calendar will correct an error if 31 is entered to a 30
day month)
- HOUR : 0 – 23
- MINUTE : 0 - 59
- DAY OF THE WEEK : MON, TUE, WED, THU, FRI, SAT, SUN
The value can be increased upward by the UP (
↑
) key, and can be decreased
downward by the DOWN (
↓
) key. The value will flash as it is being set. One can
continue to push the UP(
↑
) or the DOWN (
↓
) key until the desired value is
displayed. Again, the selection is confirmed by pressing the ENTER(
←┘
) key.
Thus, the values in the real clock will be changed according to the values entered.
If “EXIT” is selected (blinking instead of pointed by cursor), the screen will go
back to the MENU 5- the PARAMETER SETTING menu.
5-12