8
Data logging in control system (not for systems with SD
card for datalog) – Here you can retrieve the saved logging
in the control panel to the program. Change the time, if
possible, if the time of the last logging deviates from the
selected time. This is done out of consideration for the time
line at the bottom of the screen. This can be relevant, for
example, if the logging is retrieved from a transmitted
loose SD card or the like.
Click on “Receive data” to input the data. Note that this can
take up to 10 minutes. While the data is being loaded,
the control panel and the control system of the device will
not be able to communicate.
Clock in control system – An easy way to set the clock in
the control system.
Settings
Comport control – Here you select the Comport which will
be used for the data logger.
General setup – Here you can choose language,
model as well as folder for the log files.
For instance, it can be a good idea to create a folder for
logs under “Documents” and set up the program to suggest
this folder as default.
General Information
Note that:
• Loggings are not linked to setup. In other words, even if
the loggings are retrieved from the hard drive or the
control panel, they do not necessarily match the selected
control system. You therefore run the risk of analysing a
logging from a Combi, but viewing the values as if they
come from an Energy.
• The software is set up by default in Danish. This can be
changed in “Settings”.
• Certain antivirus programs will regard the log files as
viruses when they are sent by email.
Connection to PC – Optima 260
In order for the Optima 260 to be able to communicate
directly with the Genlog software, use data logger
equipment that can be connected directly to the Optima
260 printed circuit board. For details see page 5.
