Genesis single line, Руководство по эксплуатации и обслуживанию

Страница: 51 / 103

OPERATIONS
3 -25 96622 Issue 4.0 Jan 01
To select any of the fonts listed, the ”Font select” key should be pressed; once
done, the screen will appear as illustrated at
the left. By using the left or right arrow key,
the font will change. Once the desired font is
displayed, the ”Enter” key should be pressed
for acceptance. Global font change accessed
in COMMAND MODE while singular font
accessed in MESASSGE EDIT MODE.
ENTERING TEXT INTO THE CODE
The printer can imprint code having up to 32 characters in length (the
”message”). Having entered the ”Message Entry” Mode by pressing the
”Message Entry” key, a message can be entered. The cursor will appear at
the left hand side of the third line. When done, the message is accepted by
pressing the ”Enter” key. After acceptance, the display on the Controller
changes to:
The presence of the exclamation point (!)
indicates that the Controller contains data that
has not yet been transferred to the print
station. At this point, data transmission can
take place, or data transmission can be
postponed until all input of data into the
Controller has been done.
ENTERING LOWER CASE CHARACTERS IN THE MESSAGE
The printer is capable of printing lower case characters; the normal text for this
system is upper case characters. To access the lower case character set, in
”Message Entry” mode, press the ”Shift” key for each character to be printed in
lower case. The lower case characters will be seen on the screen and in this way,
you will be able to ensure that the code is input as desired. Press the ”Enter” key
for acceptance of the message when completed.