Genesis single line, Руководство по эксплуатации и обслуживанию

Страница: 35 / 103

OPERATIONS
3 -9 96622 Issue 4.0 Jan 01
the “Command Mode"
the “Message Entry Mode"
PROGRAMMING
DEFINITIONS
There are two parts to programming the GENESIS
S
INGLE
L
INE
small character
ink jet printer: inputting your preferences (parameters) as to how the printer will
code and inputting the parameters as to what the printer will code (i.e., the text).
When inputting the values for parameters that will determine how the printer
will code, the Controller is said to be in the “Command Mode.” To access these
parameters, use is made of the function keys,
F1
through
F4
, on the top line of
the Controller keypad. Each function key contains three or four parameters
which are described fully in the next
section.
When inputting the values for parameters
that will determine what the printer will
code, the Controller is said to be in the
“Message Entry Mode.” To access this
mode, the “Message Entry” key is pressed.
After entering, editing or deleting a code,
the Controller will return to Command Mode.
Note: It is imperative that the user establish the custom of “querying” the print
station before every programming session. This means that the user will aim the
Controller at the print station, press the “Query” key and receive data from the
print station. If this step is left out, the user will find that new and/or changed
parameters are not accepted by the print station.