Genesis single line, Руководство по эксплуатации и обслуживанию

Страница: 31 / 103

OPERATIONS
3 -5 96622 Issue 4.0 Jan 01
CONTROLLER KEYPAD AND LCD
The face of the Controller, pictured here, contains an LCD, 11 rows of touch-
activated keys and an on/off switch (O/I) in
the left-hand, bottom corner. The LCD can
display up to four lines of information.
The first row of keys consist of 4 function
keys, F1 to F4, the menus of which are
described later in this text.
The arrow keys allow the operator to
increment or decrement values for all your
preferences or “parameters.”
The subsequent 15 “picture” keys are named
and described following this brief
description. The alphanumeric keys that
follow are for your use in the codes that you
will imprint, as are the space key, the period
and the colon. Special characters can be
accessed by the S1 and S2 keys.
This key is called the “Message Storage” key. You will use it to
store individual codes, up to 50 such codes.
This is the “Delete” key. Use it to delete a code or to exit a function
without saving the information displayed on the LCD.
This is the “Transmit” or “Send” key. When this key is pressed
while the Controller is aimed at the print station, information will be
transmitted from the Controller to the print station
This is the “Message Edit” or “Message Entry” key. Use this key to
enter the “Message Entry” Mode to input a code or to edit a
previously entered code.
This is the “Shift” key. Use this key to access the lower case
alphabet.
This is the “Enter” or “Return” key. When pressed, the Controller
will accept input and exit certain menus.