Genesis single line, Руководство по эксплуатации и обслуживанию

Страница: 42 / 103

OPERATIONS
3 -16 96622 Issue 4.0 Jan 01
F2 MENU
The parameters listed under the F2 key are
shown in the illustrated screen at left. If,
while programming, it becomes necessary
to start anew, reset the print station: shut it
off and then while pressing the “Print
enable” and “Cycle” keys, turn the print
station back on.
CAUTION : All
parameters will return to the factory
default values.
Since the normal default condition is a falling back to the last values entered into
the Controller, to reset the Controller: after resetting the print station, query the
print station. All values in the Controller will be changed to the current values
of the print station.
DIRECTION
It is important to let the print station know
in which direction the product will travel.
Upon selecting the “Direction” parameter,
the screen illustrated at left will appear. If
the product will travel in a direction from
left to right relative to the back of the print
head, verify that the arrow is pointing to
your right. If not, use the right arrow key
and the direction will change as displayed.
Once the display shows the direction you need, press the “Enter” key to accept
the value.
PRINT INVERSE
This parameter allows coding to occur
upside down or “print inverse.” The
default setting is “normal print” or right
side up. After selecting this parameter, the
screen looks as illustrated at left. Press the
“2” key to change from normal printing to
inverted printing. Then press the “Enter”
key to accept the new print style.