Genesis CCTV H.264 Digital Video Recorder, Руководство пользователя

Страница: 44 / 77

USER'S MANUAL
44 | P a g e
ITEM
5
Sharpness
To configure sharpness of the picture slide sharpness
control slider that controls the sharpness.
ITEM
6
Hue
To configure hue slide hue control slider that controls
the hue.
ITEM
7
Copy Setting
Upon pressing Copy Setting button, Copy Settings
popup will appear.
In this popup choose the camera you want to copy from
at From drop down list field.
Choose the parameters such as Brightness, Contrast,
Saturation Sharpness, and Hue by checking on the
check box.
Check on the check box with camera numbers to apply
the copy setting to on TO check box selector section.
In order for the DVR unit to control the PTZ (Pan Tilt Zoom) type camera you must properly connect the
PTZ to the DVR unit.
DO THIS FIRST
Before configuring PTZ camera to the DVR, you must first check following items in order.
Step 1. Check PTZ manual to see what protocol the PTZ camera uses.
Step 2. Check for PTZ ID. Many PTZs have dip type switches that defines the ID number
of the PTZ. If there is duplicate ID, you may experience improper movement among PTZs.
Step 3 Make sure that you PTZ device ID starts from 0 or 1. Some PTZs first configurable ID is from 0. If
your PTZ starts from ID 0, then set the dipswitch setting to set to have ID 1 or other ID numbers.
Step 4 Check the type of connection your PTZ uses. RS-232 and RS-485 type of connection may be
used to connect the PTZ. Check the type and connect it to the proper location marked behind the DVR
unit. Chapter XX talks about RS-232 and RS-485.
Step 5 Make sure that your PTZ is not connected together with other controller devices such as PTZ
Joystick controllers. Especially, if you are using RS-232 type you may experience communication clash
between the DVR unit and Joystick controller unit. Avoid having multiple devices controlling the PTZ
camera, this may cause inoperability.
Figure 56
ITEM
1
Channel
Select the camera channel of the PTZ camera associated with the DVR camera connection input.
ITEM
2
Protocol
Select from drop down list, your PTZ camera’s protocol setting.
CHAPTER 12. CAMERA
3. PTZ Camera Configuration
Item 6 Stop Bits
Item 4 Baud Rate
Item 2 Protocol
Item 9 Copy Setting
Item 7 Parity
Item 3
Control ID
Item 5 Data Bits
Item 10
Test PTZ (Pan and Tilt)
Item 8 PTZ Speed
Item 1 Channel
Figure 55 Copy Setting Popup