Genesis CCTV H.264 Digital Video Recorder, Руководство пользователя

Страница: 39 / 77

USER'S MANUAL
39 | P a g e
For the DVR unit there are two types of Spot Monitor types are available. First type of Spot monitor is
programmable Digital Spot monitor. And second type is Analog Spot monitor that has simple
configuration setting. In this section of the chapter we will tell you the difference between these two
types of Spot monitors and show how they could be configured.
Note: Analog Spot Monitor Operation Order
Sequencing of Channel 1 ~ Last Channel of camera with sequence time defined.
When event is triggered then the view of the camera with event will display until event is
no longer happening.
If event is to occur simultaneously with Channel 1 and other channel, then the DVR unit will wait until the
event in Channel 1 will complete and will move to next channel with an event.
Monitor Event Configuration
Analog Spot Monitor configuration has full screen view switching between given interval time. They may
be enabled to react to the Alarm and Motion event configurable by each channel.
Figure 45 Spot Window with Spot Tab selected
button will set all settings to default parameters.
Use this button to either commit the configuration to save or to cancel.
Copy Setting
Figure 45 ‐ 1
Digital Spot Monitor Configuration (Monitor B)
In Digital Spot monitor configuration you can configure how the monitor will sequence the picture by
defined camera sequencing in order. You may have a full channel view sequencing and then have 2X2
split display of assigned camera to follow.
CHAPTER 11. DISPLAY
3. Spot Monitor Settings and Operation
Enable or disable Event display by selection
“Alarm, Motion, A+M” or “Off” radial button.