USER'S MANUAL
19
|
P a g e
Figure 13 CAT 5 cable color code for
EIA/TIA E568B Configuration
The external S-ATA port is used to connect external storage devices that support S-ATA format
Figure 14 E-SATA Connection
The USB connection ports are used for both back up and mouse control purposes. Either port can be
used for back up via USB memory stick or for mouse control. A third option for the two USB ports are
for firmware updating procedures. You will only need to use one port for firmware updates.
Two USB ports are located on the front side of the DVR. These ports may be used for both USB mouse
connection and for USB memory stick back up procedures. There are two (2) USB ports on the front
side key panel of the DVR. It is recommended to use the top port for Firmware Updates and USB
backup, and the bottom port for the USB mouse connection.
Figure 15 USB Connector Port
The power is supplied to the DVR by an internal power supply unit, and can be either switched on or off
by the toggle switch located on the rear panel of the system.
Input Voltage
100 - 240 VAC ±10%
Current
4A - 2A
Specifications
Input Frequency
50/60 Hz
WARNING!
This is a live electrical outlet. risk of electrical shock. do not attempt to open the cover of
the DVR or the power supply unit. Contact your local service center for repair. Warranty is
void if the system is improperly handled
Signal Type
Pin Number
Description
LAN Tx +
1
Ethernet Transmit Positive
LAN Tx -
2
Ethernet Transmit
Negative
LAN Rx +
3
Ethernet Receive Positive
N/U 4
Not
Used
N/U 5
Not
Used
LAN Rx -
6
Ethernet Receive Negative
N/U 7
Not
Used
N/U 8
Not
Used
CHAPTER 3. HARDWARE CONFIGURATION
11. External S-ATA
CHAPTER 3. HARDWARE CONFIGURATION
12. USB Connections
CHAPTER 3. HARDWARE CONFIGURATION
13. Power Connections
Top
port
‐
Firmware
Updates
&
USB
Backup
Bottom
port
‐
USB
Mouse
Connection
Содержание H.264 Digital Video Recorder
Страница 1: ......
Страница 77: ...USER S MANUAL 77 P a g e...
