Generic XOR 50 ccm, Руководство по обслуживанию

Страница: 92 / 110

92
REASSEMBLY AND REMOUNTING
Reassemble and remount the rear wheel and
brake in the reverse of removal, and also
carry out the following steps:
□
Turn the punched mark on the camshaft
to the rear axle shaft side.
□
Install the protrusion of indicator plate to the
groove of Camshaft.
□
When installing the brake cam shaft, aligh the groove
of camshaft with the slit of on cam shaft.
□
When installing brake shoes, be sure to daub
camshaft with adequate grease.
CAUTION:
Be careful not to daub the camshaft with too
much grease.
If grease gets on the lining, brake effectiveness will be lost.