Generic XOR 50 ccm, Руководство по обслуживанию

Страница: 44 / 110

44
z
Install the movable driven face seat.
z
install the clutch shoe assembly and nut.
z
tighten the nut to the specified torque with the
special tool.
tightening torque
：
40-60 Nm
(4.0-6.0kg.m 29.0-43.5Ib-ft)
z
insert the V-belt between the driven faces as
deep inside possible while pulling the movable
driven face all the way outside to provide the
maximum ble clearance.
CAUTION:
the belt should be positioned so that the arrows
on the belt periphery point the normal turning
direction.
The V-belt contact face on the driven faces should
be thoroughly cleaned to be free from oil.
z
Thoroughly clean the clutch housing to be free
from oil and position it over the clutch shoe
assembly.
z
tighten the clutch housing nut to the specified
torque with the special tool.
Torque
：
40-60 Nm
(4.0-6.0kg.m 29.0-43.5Ib-ft)