Generic XOR 50 ccm, Руководство по обслуживанию

Страница: 46 / 110

46
z
Insert the spacer
z
Position the movable drive face
subassembly on the crankshaft as shown in
illustration.
NOTE
：
Thoroughly clean the belt contact to be
free from oil.
z
Install the fixed drive fan.
z
tighten the nut to the specified torque with
special tool.
Connecting rod fixer
Tightening torque
：
40-60Nm
(4.0-6.0kg-m, 29.0-43.5Ib-ft)
z
fill grease in the groove provided inside sliding
surface of the kick driven gear and install on the
end of the crankshaft. Wipe off excess grease.
QIANJIANG super grease
Install washer and spring.
NOTE:
When Installing washer
，
face the resin surface
of washer to outside.
z
install the retainer.
z
continue turning the fixed drive face by hand
until the belt is seated in and both the drive and
driven faces will move together smoothly with
slip.
fill the final gear box with engine oil up to the
level hole.
Oil capacity
：
90ml
z
tighten the oil level bolt to the specified torque.
Tightening torque
：
9-15Nm