GENERGY 401173, Инструкция по эксплуатации

Страница: 81 / 150

78
Englis
h
10.1 Use of the outlet port of 230V AC
NOTE : Check that no devices are plugged into the generator; unplug
everything before starting the engine.
Start the engine following the steps indicated in this manual.
Once started check that the 2 circuit breakers are "ON" (up), as shown in the
figure below.
Now, you can connect the devices to the 230V outlet port of the generator.
In order to improve the engine operation and extend the lifespan of the machine,
we recommend a "break-in period" of 20 hours without forcing the generator, with
charges that do not exceed 60% of the equipment's maximum output.
WARNING: Confirm that all electrical devices are in good work conditions
before plugging them to the generator.
NOTE: If an electrical device is not working properly, is slow or stops
suddenly, turn off the engine immediately and unplug the device.
CIRCUIT BREAKERS