GENERGY 401173, Инструкция по эксплуатации

Страница: 65 / 150

62
Englis
h
Buy an approved bottle regulator distributed by supply companies in your area.
The output pressure of the regulator will be
30mbar and guaranteed flow
2.5Kg/hour.
1
Connect the feeding hose in the regulator and fix with a clamp (materials are
not included).
2
. Now connect the other side of hose on to the "Propane Input" located on the
generator panel control, fixed hose firmly with a clamp (not included).
Before using the equipment check the tightness of propane hose connections, for
this first open the tap regulator of the propane bottle to keep pressure in hose.
Then spray hose connections with a soapy water spray, if any leakage, small
bubbles will be observed. Once discarded any gas leak clean and dry the soapy
water.
If you see or smell a leak but cannot locate or correct it, close the regulator valve
of the bottle and call a plumber or local gas installer to perform a proper
connection.
HOSE
PROPANE BOTTLE
PRESSURE
REGULATOR