General Photonics PDLE-101 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 61

background image

WARRANTY

All of General Photonics’ products have been inspected and found to comply with our
stringent quality assurance standards before shipping. If any damage occurs during
shipment, please contact the carrier and inform us or our distributors as soon as possible.

Please do not, under any circumstances, attempt user repair of any General Photonics
product. To avoid further damage, any repair of defective products must be performed by
trained engineers.

General Photonics warrants that this product will be free from defects in materials or
workmanship for a period of one year from the date of original shipment (listed on the
certificate of quality or packing list enclosed with the original shipment). A product
found to be defective during the warranty period will be repaired or replaced, at no
charge, at General Photonics’ option.

If a problem is found, please contact General Photonics for assistance. If necessary,
return the defective product, freight prepaid, clearly labeled with the RMA number, with
as complete a description of the problem as possible. The repaired or replacement product
will be returned, freight prepaid, as soon as possible.

The above warranty specifically excludes products that have been repaired or modified
by non-manufacturer-authorized personnel, as well as damage caused by misuse, abuse,
improper storage or handling, or acts of nature.

This warranty is in lieu of all other warranties, expressed or implied. General Photonics
will not be liable for any indirect or consequential damages or losses resulting from the
use of its products.

Document #: GP-UM-PDLE-101-11

Page 2 of 61

«
1
2
3
4
...
»

Содержание PDLE-101






























































Отзывы:

Нет отзывов

Похожие инструкции для PDLE-101

SISPM1040-582-LRT

Бренд: Lantronix Страницы: 2

Бренд: Lantronix Страницы: 7

Бренд: Furuno Страницы: 24

Parallel & Serial Port Checker PPC

Бренд: B&B Electronics Страницы: 4

Бренд: JETWAY Страницы: 55

Бренд: Lutron Electronics Страницы: 4

RanaSystems 13-0010--001

Бренд: RANA Systems Страницы: 328

Бренд: SYNTEK Страницы: 41

Бренд: Xtreme Страницы: 83

Бренд: Vacron Страницы: 16

Бренд: Xilinx Страницы: 29

Бренд: Pilz Страницы: 12

NC-MCO - TECHNICAL

Бренд: Crest Audio Страницы: 2

Бренд: ExtraHop Страницы: 3

Бренд: VIA Technologies Страницы: 2

Macho Rev. A (BW)

Бренд: Thermalright Страницы: 32

11th Gen Intel Core U-Series

Бренд: IBASE Technology Страницы: 70

Бренд: DOD Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды