Generac Power Systems PWRcell 3, Руководство по установке

Страница: 22 / 36

Installing Generac PWRcell Battery
18 Installation Manual for Generac PWRcell Battery
Installing Module Spacer (Generac PWRcell 3
and Generac PWRcell 5 only)
See Figure 4-15 . Module spacers (O) must be installed
on any single module shelf.
O
009933
Figure 4-15. Module Spacer
Generac PWRcell modules and upgrade kits can be
obtained by contacting Generac Customer Service at 1-
888-436-3722
(1-888-GENERAC), or www.gen-
erac.com .
NOTE: Kits must be installed by a qualified individual.
See Table 5: Module Spacer Kit for part number.
Table 5 – Module Spacer Kit
Module Spacer Kit Part Number
Generac PWRcell Spacer Kit HMSK101
To install module spacer:
1.
See Figure 4-16 . Angle top of spacer (P) under
and behind bracket lip (Q).
P
Q
009934
Figure 4-16. Installing Module Spacer (1 of 3)
2.
See Figure 4-17 . Slide spacer up between brackets.
3.
Push bottom of spacer in.
1
2
009935
Figure 4-17. Installing Module Spacer (2 of 3)
4.
See Figure 4-18 . Secure spacer with two M4X8
machine screws.
009936
Figure 4-18. Installing Module Spacer (3 of 3)
Installing Retention Clips
See Figure 4-19 . All front battery modules must be
secured with retention clips (R).
R
009937
Figure 4-19. Retention Clips (1 of 3)