GEL DOSAMATIC PP, Инструкция по установке, эксплуатации и обслуживанию

Страница: 53 / 120

ENGLISH
53
Which parameters must be set?
% (percentage of product quantity to dose)
CONC (% of product concentration)
Impulses from water meter
CC/Stroke
TIMEOUT
Use “ UP ” key to change selected unit (“_” blinking cursor).
To move to next digit (unit) press “ RIGHT ” key.
To modify the “Conc” concentration value press “ P ” key.
Use “ UP ” key to change selected unit (“_” blinking cursor).
To move to next digit press “ RIGHT ” key.
Press “P” key to save the entered value and “ ESC ” to exit
to main menu, or only press “ ESC ” to exit without saving.
Note : For the proper working of this mode make sure you
have set the parameter “TIMEOUT”. “Timeout” is operating
when the calculation result is a multiplication.
5.6 “MLQ” working mode
The impulses supplied by a water meter connected to the pump determine the dosage according to MLQ
value, product concentration and quantity per stroke set during programming.
When to use this mode?
This mode is useful when an external signal sending impulses (water meter with impulse sender) is
available; it is necessary to properly dose a product in the set quantities, by specifying only MLQ (millilitres
per quintal). The pump will control incoming impulses.
Which parameters must be set?
MLQ (product quantity in millilitres per quintal)
CONC (% of product concentration): set 100% if the product is pure
CC/STROKE (see page CC/ST)
WMETER (water meter with impulse sender)
TIMEOUT
Use “ UP ” key to change selected unit (“_” blinking cursor).
To move to next digit (unit) press “ RIGHT ” key.
To modify the “Conc” concentration value press “P” key.
Use “ UP ” key to change selected unit (“_” blinking cursor).
To move to next digit press “ RIGHT ” key.
Press “ P ” key to save the entered value and “ ESC ” to exit to
main menu, or only press “ ESC ” to exit without saving.
Note : For the proper working of this mode make sure you have set the parameter “TIMEOUT”. “Timeout” is
operating when the calculation result is a multiplication.
mode ( 02 )
divide
DIVIDE
150.00
mode ( 03 )
multiply
multiply
010.00
mode ( 04 )
PPM
ppm
0003.00
conc %
010.0
mode ( 05 )
PERC
perc
03.0
conc %
010.0
mode ( 06 )
MLQ
MLQ
03.00
conc %
010.0
Tasto
Tasto
Tasto
Tasto
Tasto
Tasto
Tasto
Tasto
Selectable from
0.1 to 10.0%
Key
Key
mode ( 02 )
divide
DIVIDE
150.00
mode ( 03 )
multiply
multiply
010.00
mode ( 04 )
PPM
ppm
0003.00
conc %
010.0
mode ( 05 )
PERC
perc
03.0
conc %
010.0
mode ( 06 )
MLQ
MLQ
03.00
conc %
010.0
Tasto
Tasto
Tasto
Tasto
Tasto
Tasto
Tasto
Tasto
Key
Key