26
COMPONENTS OF THE WATER SOFTENER
The softener is the absolute solution to scale problems in water. Very easy to install and to use, it is made
up of a container for the resins, a container for the salt, necessary for periodically regenerating the resins,
and a hydropneumatic valve which, controlled by a timer, carries out the regeneration cycles necessary to
keep the unit efficient.
IMPORTANT: the softener may be installed on municipal water only. For different applications
(on well water, etc.) please ask GEL Export Department by e-mail ([email protected]) for the written
authorisation indicating the serial number of the softener.
1 - Timer
2 - Valve
3 - Vessels with resins
4 - Cabinet (resins container, salt tank)
5 - Plug
6 - Trap
7 - Brine valve
8 - Mixing valve
9 - Chlorine cell
10 - Brine suction hose
11 - Drain hose
12 - Drain
13 - Vessel base
Note:
in Decal models the brine tank is separated
from the valve/ timer group.
INSPECTION
Upon receipt of the water softener:
• Check that the packaging and the softener itself have not been damaged during transport
• Check that the carton contains the following components:
Decal Basic Models:
• Group vessel-valve-timer;
• brine tank, fitted with trap and brine valve;
• reinforced hose;
• brine suction hose;
• hardness kit;
• instruction manual.
Decalux Basic Models:
• Group cabinet-vessel-valve-timer;
• brine suction hose;
• hardness kit;
• instruction manual.
