46
13.8 - HOW TO DISPLAY VOLUME/ LITRE COUNTER
The timers
VT 1000
and
ET 500
are capable of displaying the amount of water (cubic metres) that the
softener can treat between two regenerations (value referred to 0 °f at the outlet).
This value can be read on display by pressing keys
+
A
–
B R
at the same time.
After 20 seconds, the timer will automatically restore the entered data. In the VT 1000 only, by pressing
again keys
+
A
–
B R
, within 20 seconds, the amount of water already softened from the last regeneration
will be displayed (value referred to 0 °f at the outlet).
For exit press key
+
A
–
B R
.
14 - DIRECTIONS FOR DISPOSAL
Do not dispose of the product with household waste.
Dispose of in compliance with the national regulations in force.
15 - WARRANTY AND AFTER SALE ASSISTANCE CONDITIONS
GEL, located in via Enzo Ferrari, 1 Castelfidardo (AN) – Italy, warrant that the products and equipment, at
the time of delivery to the consumer, shall be free from defects in workmanship and materials. The absence
of such defects guarantees to the consumer that the goods:
• comply with the description given in the documentation (technical specifications, catalogues, price lists,
advertising);
• are free from defects in design, materials and workmanship;
• are fit for the declared purpose under normal operating conditions and in compliance with the directions
given in the instruction manuals supplied with the equipment.
GEL are liable to the consumer for any defect in workmanship and materials which appears within 24
months from the date of purchase, even when warranty operations have been carried out.
In accordance with the directive 99/44/EC valid in the EEC countries, the warranty rights apply only to the
consumer. The warranty supplied by GEL leaves these rights unprejudiced.
The warranty covers all components of the equipment and provides for the repair or, if necessary, the
free replacement of those parts that, according to Technical Assistance, show defects in workmanship or
materials.
The warranty does not cover aesthetic parts, wear and tear parts, all damages or failures whose cause is
not due to the manufacturer, such as: transport, incorrect installation or maintenance, tampering, sudden
changes in electrical voltage and/or hydraulic pressure, lightning, corrosions, excess of humidity, accidental
bumps or events beyond our control.
The defect is recognised even in case of incorrect installation, if the installation has been carried out by
GEL, i.e. on their own responsibility. Warranty is also recognised when the equipment, intended to be
installed directly by the consumer, results to be installed improperly due to incorrect installation instructions.
The warranty is valid only if the equipment has been installed, used and properly maintained according to
all directions given by GEL in the instruction manual attached to the equipment.
Should any defects in workmanship or materials be found during the warranty period, the customer shall
notify the dealer to agree upon the terms for repairing and/or replacing the product.
