Gehl GE 802, Руководство оператора

Страница: 15 / 52

PRINTED IN U.S.A.
2-3
90 8147 /0999
Mandatory Safety Shutdown Procedure
Before leaving the machine:
1. Lower the working equipment to the ground and support
it securely.
2. Reduce throttle and turn off the engine.
3. Lock out controls by raising left control console.
4. Remove the ignition key and take it with you.
• Check all electrical wiring and connections for damage.
Keep the battery terminals clean and tight. Repair or
replace any damaged parts.
• Check fuel and hydraulic tubes, hoses and fittings for
damage and leakage. Tighten or replace any parts that
show leakage. Always clean fluid spills.
• Always the clean the machine before performing any
welding. Cover rubber hoses, battery and all other flam-
mable parts. Keep a fire extinguisher near the machine
when welding.
• Stop the engine and let it cool before adding fuel.
SAFETY DECAL & STICKER LOCATIONS
1
18
18,19
2
23
7
8 9 10 11
12
14
13,17
5 3
4
6
15,16
18
14
22
20, 21
29
25, 26
1. WARNING: Danger zone. Keep away! (both sides
of the boom)
2. Direction arrow (left and right on track frames)
3. Hydraulic Oil
4. WARNING–Hydraulic reservoir under pressure
5. Diesel
6. WARNING: Do not open when engine is running
7. Lower boom, raise boom, close bucket, open
bucket (on windshield)
8. Lower dozer blade, raise dozer blade (on wind-
shield)
9. Travel right, forward/reverse (on windshield)
10. Travel left, forward/reverse (on windshield)
11. Bucket arm out, bucket arm in, superstructure left,
superstructure right (on windshield)
12. Environmental symbol (blue angel) (on windshield)
13. Nameplate
14. Warning. TO AVOID INJURY: Read the Operator’s
Manual before using the machine. Be sure all
user’s are instructed on safe use and mainte-
nance. Service the machine per the manual.
Contact dealer (or manufacturer) for information
and service parts.
15. L
WA
96
16. L
PA
78
17. CE symbol
18. Lifting point for lifting the excavator (left and right
on boom and dozer blade)
19. Tie down point (left and right on dozer blade and
chassis