gefran AFE200 Series Скачать руководство пользователя страница 122

Страница: 122 / 178

122

AFE200 • Instruction Manual

15 - ALARM CONFIG

In the ALARM CONFIG menu the type of effect any alarm signals have on the AFE product is determi-

ned:

- The alarm status is saved

- How must the AFE product react to the alarm signal?

- Auto restart

- Alarm reset

For some alarms, behaviour can be configured separately for each signal, while for the others the

Disable AFE product is executed. Individual signals can also be sent to a programmable digital output.

Activity

Ignore

The alarm is not included in the list of alarms, it is not included in the

alarm log, it is not signalled on the digital outputs, no AFE product com-

mands are modified.

Warning

The alarm is included in the list of alarms, it is included in the alarm log, it

is signalled on the digital outputs, the First alarm information is updated,

the Alarm enabled information is updated, no AFE product commands are

modified.

Disable drive

The alarm is inserted in the alarm list, it is inserted in the alarm log, it is

signalled on the digital outputs, the First alarm data is updated, the Alarm

active data is updated, the AFE product is disabled.

n alarms with Activity = Ignore or Warning can be enabled at the same time.

If an alarm with Activity = Stop or Fast Stop is enabled and another alarm with an Activity other than

Ignore or Warning is enabled, the AFE product stops and is disabled

Not all alarms allow the controlled stopping of the AFE product. The following table shows the possibi-

lity of setting the Activities for the individual alarm signals.

Alarm

PAR

Ignore

Warning

Disable drive

ExtFlt activity

4504

√

ExtFlt restart

4506

√

UndervoltAC activity

4534

√

UndervoltAC restart

4536

√

Overvolt AC activity

4554

√

Overvolt AC restart

4556

√

Drive ovld activity

4570

√

HTsens restart

4582

√

InAir activity

4600

√

InAir restart

4602

√

Desat restart

4610

√

IOverC restart

4620

√

OverV restart

4630

√

UnderV restart

4640

√

Optionbus activity

4670

√

Содержание AFE200 Series



















































































































































































Результаты поиска

Содержание AFE200 Series

Отзывы:

gefran AFE200 Series, Инструкция по эксплуатации, Страница: 122 / 178

Результаты поиска

Содержание AFE200 Series

Отзывы: